X-Plane 11.00 public beta 13 is out, and hopefully it has restored engine operation that beta 12 broke. If you are developing an aircraft and your engines don’t work right in public beta 13, please let us know.
X-Plane 11.00 public beta 13 is out, and hopefully it has restored engine operation that beta 12 broke. If you are developing an aircraft and your engines don’t work right in public beta 13, please let us know.
Comments are closed.
Starting the engines of the B200 from Carenado works again.
Also fixed: feathered prop does not windmilling anymore 🙂
But the turbine is still windmillig, at wind with about 20 kt 2,5% N1, about 1000 RPM
I don’t know if this is ok with a PT6
Thanks
I fly King Airs (B200, B100, C90). With a prop feathered the airflow through the inlet will still rotate the engine core. You could even use this rotation to airstart if you get the rpm above 12%. Carenado is not perfect, but they get a thumbs up from me. I did have to reduce landing flap drag on the C90 by 20% however.
How long have you been planning that post title, Ben? 😉
I wasn’t gunna tell anyone, but I asked Austin to break engine start in a public beta SPECIFICALLY so I could use that title. 😉 Having a stable sim is nice, but clever blog tiles are clearly the priority…
And you managed it well on this one ! 😀
What about the ladies?
Ben, if those changes in idle are not a bug, why the default jets are still operating below standard N1 idle?
Haven’t LR updated the default fleet yet?
Cheers
The default fleet may not be updated, no.
Ben,
Well, pb13 somewhat fixed the engine problem with the Flight Factor 767-300ER. I can now get it started but I have to keep the throttle way too high to keep things turned on (hydraulics, packs, etc.) If I leave it on idle, no go. Also, now the built-in pushback is broken and I can’t even reverse thrust pushback. I filed a bug report on this.
After filing the report, I did a full flight in the FF 767-300ER…When descending and the auto pilot throttles back, I get all kinds of warnings (hydraulic pressure, packs, etc.). So, from my point of view, it appears that progress is being made but the 3rd party engine fix for this plane is not yet totally fixed. I note that pb11 had none of these issues.
Additionally, pb13 seemed to impact the fmc on version 1.1.27 of this plane…couldn’t select departure…so, the preceding paragraphs issues were encountered with version 1.1.23 (for which I had no problems in pb11).
Keep up the good work!
–Dave
Hi Dave,
The FMC handling of the FF 767 was changed a little bit in version 1.1.27.
Just select INDEX when pressing the “DEP/ARR” button on the FMC and you are where you wanted to go to. This is not an issue at all – especially not caused by XP11 beta 13.
The low engine idle problem requires a fix by Flight Factor. Flight Factor is aware of it and stated at the ORG forum to work on a fix:
http://forums.x-plane.org/index.php?/forums/topic/116264-b767-version-1127/&do=findComment&comment=1132115
Regards,
Marc
Thanks Marc!
Here is a working fix for the FF 767 to run XP11 beta 13:
http://forums.x-plane.org/index.php?/forums/topic/116264-b767-version-1127/&do=findComment&comment=1133863
This is a fix made by a user, not by FF. But it runs perfectly fine with engine idle N1 at 21.8. All systems run stable at N1 21.8 and taxiing has become fun again with beta 13!
Regards,
Marc
Thank a lot… Best title ever! hehehehehe, thanks a lot for this update…
Xplane 11 is getting better every day!
FlightFactor A350 still not working. 🙁
PB 12 and 13:
Engines start up, but not enough power. Hydraulics and Generators off.
Will any editing in Plane Maker help?
Last worked in PB11.
Try the f-35 latest version 1.7 noticed unless I unlock the afterburner it wont spool past around 70 percent or so but once the afterburner is enabled I can use 100 percent engine power. I didnt have the issue before the last update.
Can you send the ACF to Austin please.
I have to check again on the PMDG DC-6 but I think it still broken.
My mistake Ben, engines are OK on the DC-6.
It still remains the inversed rudder animation (but behaviour OK) – bug filed. – but not planned on urgent pb13 I guess.
Reversed control surfaces on v11 vs v10 is almost always an authoring problem – the author will probably have to update the aircraft for v11 compatibility.
Well, you’re certainly right but it was OK on few betas I think.
I am familiar with the aircraft involved and they need an update.
Hi Ben.
I tried the Carenado PA31 CHIEFTAIN 350 with pb13 and the engines start but instead of a few seconds of cranking its practically instantaneous. Also, throttle must be advanced quite a bit to keep the engines running.
For all planes, the idle power is too low, about 10%.
Hi Ben
IXEG 737 Classic only one engine working . both starting nut only one of them accelerate. the other keeps idle around 40%.
Hello Ben,
|I installed a clean copy of xplane, plus IXEG still the some .
This weekend relased xp11 beta 14 ?
Getting 30-37 fps with visual effects on HDR, Number of Objects to High, Texture Quality to Maximum and Reflections set to off (this feature is totally useless and while intented to be awesome, it is just a performance killer), Anitaliasing set to 2X SSAA FXAA
This with the default B58 (test aircraft) gives me as I said 30-37 FPS in game with no drop or peeks. Sadly everything I now on introduce as airplanes or scenery the FPS indicator will continue to drop making XP11 pretty much a very heavy driven game for my computer spec. (i7 3770K stock speed – 16GB DDR3 1866Mhz ram – Asus Nividia GTX 1080)
This PB is by far the most correct step in the right direction as of performance. Never got this high or should I say stable performance with default X-Plane. This is good, if this is a baseline, I sure hope things get better. Best notion with the settings in XP10 was that it could be more adjusted to fit low to mid end PC’s. Since most of the users are having variable specs, I do believe the power is in the eye of the beholder, not the creator as when it comes to adjusting graphics settings/loads. I would bet this it’s why X-Plane 10 feels more like a performance friendly simulator for today’s computing hardware. X-Plane 11 while it looks damn good compared, it feels like a simulator for the future. With that statement mean it will fit the computer “low to mid-range” in about 1 1/2 year if Moore’s law are applicable as a measurement.
So keep up the progress we all love regardless of our opinions and feedback. We are dedicated and absolutely in love with the product you may call work and we call life!
Couldn`t agree more. Performance is rock-solid now and really fun to Play. I have a Gtx 970 with a Skylake I7 6700 and everything on High.
Ben,
Did you forget there are also ladies in this world of simulation too! 🙂
Let’s not forget the most dedicated of them all, Emma Kate Bentley 🙂
Now I have an issue with the C172.. It needs a lot of throttle input – almost 2100-2400 rpm to get it going. Anyone else is getting that issue since pb13?
I did not encounter this issue.
I tested this in ICAO: YBAF.
Plane started rolling ~700rpm and accelerated as expected. I was able to bring it to 80knt when RPM reached 2000-2200.
Try to switch location, I had an issue with “stuck” plane, had to push throttle almost to the end to make plane move, at the end I had to change location to fix it.
I think this will be fixed in beta 14.
Saar, thank you for your reply.
I tried last night from YBAF and still the same problem. I need to bring the throttle to at least 2200 rpm to get the C172 start moving. After that, it’s usually ok.
Ben was it the type of issue you were referring to when you said that beta 14 could fix it?
Thank you!
Problem solved with pb14.
Thank you.
I can say that I am from the red team, AMD hardware.
I find only problem in starting movement with Cessna 172, it requires more power.
Graphical performance I consider good, after improvements in pb9, use X-Plane 100% “pure” no add-ons, nothing.
Annoying by X-Plane 10.52 with improvements of pb9 !!!
João Alfredo
Weird issue with X-Craft E-195 v2. Engines start correct, but when you move throttle lever – nothings happen, engines don’t react. Here’s small video shows this: https://1drv.ms/v/s!Apfp9a6A-HJdgnpq0pQ-RzeIMGuL
Please file a bug.
PB13
Engine Problems with PC12 and SenecaV.
Power idle SenecaV Engine stop.
1500RPM Vac warning.
PC 12 idle power downwind for 2 Minutes.
Engine Fire.
Final approach planes will drift right and left with no gusty wind. If i put the power back and then fast forward…plane drop. Stall…hard to recover.
Leave taxiway planes crash. Slow speed.
Sometimes planes stuck at position. 100% power than moves.
Some NavData not correct. Wrong ILS Freq. With actually Airac1703. But don´t take effect in GNS430/530.
Greetings
Hi,
You need to report these things via the bug reporter.
Thanks
Ben
Not OK for me. Perhaps on pb 14 (I hope…)
Hi Ben,
recently I posted about a strange Carenado B200 behavior:
“I filed a bug about the B200 from Carenado, all reflective surfaces inside the cockpit are mirroring landscape textures, even above 8/8 cloud layers.
This bug exists in Beta 10 too.”
A further finding maybe interesting for you, if not – I didn’t write anything …
The reflections from outside will be seen, if “Visual Effects” are set to Medium,
setting them to High (HDR) the surfaces inside the cockpit are refleting the cockpit, as it should be.
/Günther Wittwar
This is expected and is a mandatory upgrade – that is – artists have to specify for interior glass surfaces whether they are “inside glass” or “outside glass” in v11 – we have no way to guess this correctly for legacy v10 aircraft.
This I understand, Ben, seems also depend on the level of Visual Effects.
I just wonder why is it working with the Visual Effekts set to High?
Is at that level another kind of guessing at work?
I think it’s luck that the artifact is more objectionable on certain visual settings.
With this latest update I cannot run my Full X-Plane 11 installation…it simply crashes while loading. My X-Plane 11 installation is a plain vanilla..no addon or plugin.
PLease contact tech support.
Sent a bug report. X-Plane crashes if I install latest FAACIFP18
When I purchased the X-Plane 11 Beta in early January I thought I’d have a new fine, stable Sim by March or April.
Why does LR fundmentally change things so late in a Beta program?
Your customers are waiting for a final product, the addon developers are waiting for release and the new SDK.
Customers want to enhance XP11 with addons, but developers cant progress.
The current turns in the Beta are bad for your Business and reputation, I think.
We have three choices.
1. Make the change at 11.0, albeit late in the beta. This makes people who think the beta should be final really nervous. It makes developers who have shipped their add-on despite it being a beta unhappy. It reveals the mismatch in expectations between LR and third parties. It shows the danger of having a reasonably stable EARLY beta when all feature work is not done.
2. Make the changes in a point release. Our goal is to maintain add-on compatibility during the binary release, so this makes the change a LOT more expensive – the change has to be wrapped in a big pile of compatibility code. This is not impossible..but it takes developer time. That developer time means something else cool for x-plane doesn’t happen until later.
3. NOT make the change at all, and continue with the old code. Based on what Austin has learned about engines, he considers the old code to simply be _wrong_. Wait another few years.
Given these three choices, I thought option 1 was the least bad option.
We are trying to get to ‘final release’ as fast as we can. But the fact that we still call it a beta, and not even an RC, should give you some indication of where we are at with that process.
Beta is beta guys. Thats it. For now what it could be later…very good so far.
For stable IFR long flights better choice is at the moment XP10.
We must wait…for the big suprise. 😉
Wishes for me are:
Stable planes. Stable sytem.
Correct NAV implementaion
Old plane integration 10 to 11
Trip planning tool
Question:
Will the Carenado planes (PC12/TBM750/SenecaV) work stable after final release without an carenado update ?
Greetings
John
Hi John,
Probably not. There are mandatory engine model updates for v10->v11. If the author doesn’t update the plane and the plugin code in the plane is picky about engine behavior, it’s unlikely the plane will “just work close enough”.