Category: Scenery

What Doesn’t Get Compressed?

Speaking of compression, X-Plane doesn’t compress all textures…even if “texture compression” is on, we leave uncompressed certain textures that are flagged. A rough list:

  • Most textures in the sky, like clouds and color stripes, have a lot of alpha and get wrecked by compression. They get exempted.
  • Anything related to the 2-d panel, maps, and the UI get exempted.
  • Some of the overlays like rain and snow, smoke puffs, and lights.
  • Taxiway signs get exempted…S3TC does a number on letters and numbers.
Posted in Scenery by | Comments Off on What Doesn’t Get Compressed?

Texture Compression Is Your Friend

Try this experiment: take three screen-shots (use ctlr-; to get a stable, clear view), with these settings:

  1. Extreme res, with tex compression
  2. Extreme res, without tex compression
  3. Very high res, without tex compression

Now consider the effect on VRAM. Each time you go down a texture resolution level, tex sizes are cut in half, and you cut VRAM use by a factor of 4.

If you use texture compression, you cut VRAM use by a factor of 4 for textures with alpha and a factor of 6 for textures without alpha. (Some textures are unaffected because they are internally marked as “never compress”.)

Now look at your visual results. I would argue two things:

  • At extreme res, turning off texture compression doesn’t make the image a whole lot nicer. (It does make the machine a whole lot slower!)
  • Texture compression is a lot nicer than going down a res level.

I suspect that if your machine can’t handle extreme res, you can get similar results running the whole experiment down one notch.

I think that almost everyone who has a limited machine is running with texture compression these days – we default with it on and it helps fps. I would only argue that any users who are running with a huge machine and compression off might consider turning it back on. It doesn’t hurt much and it does make the machine run faster.

(Even if you have a ton of VRAM, X-Plane can be limited by how fast texture data transfers from VRAM to the GPU, within the card. Texture compression helps this.)

Posted in Scenery by | Comments Off on Texture Compression Is Your Friend

Spankings

Austin and I have this debate over and over when we find a case where third party content doesn’t work right with X-Plane (but did in the past due to X-Plane’s permissiveness):

  • If we code X-Plane to work around the problem, users get to enjoy the scenery, and authors will never fix the problem.
  • If we code X-Plane to abort, users get grumpy, and authors fix the problem real fast.

What to do? A few versions ago I implemented the scenery warning system (the spanking system) to try to get the best of both worlds. I just discovered another problem that illustrates how this works well.

Before WED some authors made apt.dat 850 layouts by hand using a text editor, and sometimes they forgot to include a closing code on their rings and chains. I can hardly blame them, writing an apt.dat file by hand is very difficult, and I am impressed (and grateful) that they did this.

The apt.dat 850 spec is clear:

  • Pavement chunks (line code 110) must comply with the following:
    • Chunks MUST terminate in a segment point of type 113 or 114.
  • Linear features (line code 120) must comply with the following:
    • Linear features must terminate in a point of type 113, 114, 115 or 116.
    • Linear features do not need to be “closed”.
  • Airport boundaries (line code 130) must comply with the following:
    • Boundaries MUST terminate in a segment point of type 113 or 114.
    • Boundaries must be a closed loop and cannot contain holes. As with pavement chunks, the airport boundary cannot overlap itself.

So, you must have one of the closing codes at the end of a boundary, taxiway, or line. But X-Plane 860 doesn’t check this and simply assumes a “closed ring” if no code is provided. With X-Plane not telling authors, the authors never caught this mistake.

So now that I know about this (and now that X-Plane needs the end codes to be right, due to other bug fixes) it’s time for the spanking system. In future versions of X-Plane:

  • Custom scenery packages with no ending code on a polygon block will automatically be adjusted to be “ring”-type on load-in, for compatibility with X-Plane 860.
  • A detailed message will be printed per polygon in the log.txt file.
  • A single alert box will be shown to the user saying “there is a problem with the custom scenery pack XXX”.

The idea is for the dialog box to walk a fine line between being unobtrusive enough for users and annoying enough for authors.

Posted in File Formats, Scenery, Tools by | Comments Off on Spankings

No more scenery in the Resources/Earth nav data folder.

Back in X-Plane 7 the default scenery location was the “Earth nav data” folder of the Resources folder. Custom scenery went into packages in the “Custom Scenery” folder, just like now.

In X-Plane 8 we introduced the concept of a “default scenery” folder in the resources folder. The default scenery folder acts exactly like the custom scenery folder, in that it holds scenery “packages”, but it has two special properties:

  1. Packages in this folder have lower priority than any custom scenery package.
  2. It is in the resources folder and is therefore the turf of Laminar Research and our updater — the Custom Scenery folder is for third parties.

Okay that’s not really a special property, more of a convention. But the main idea here was to remove special cases from the scenery system…in X-Plane 8, all scenery comes in packages, no matter what it is and who ships it.

Scenery comes in packages, period. Repeat it like a mantra.

The original X-Plane 8.0 still installed legacy ENV files into the Resources/Earth nav data folder (but installed DSFs into a package). X-Plane 8.20 (when we shipped full DSF scenery) installs everything into packages, as will all future versions of X-Plane.

X-Plane 8 still looks in “Resources/Earth nav data” as a last resort. But this is going away! Future versions of X-Plane will only look for real scenery packages in the “Custom Scenery” and “Default Scenery” folders.

What does this mean to you? Almost certainly nothing…but…

  • If you are an author and your scenery needs to be installed into the resources/Earth nav data folder, fer cryin’ out loud, please put your scenery into a custom scenery package. It takes about 5 seconds and will make life easier for you and your users.
  • If you are a user and you have been moving files into the the resources/Earth nav data folder, please don’t do this! Learn how scenery packages work and put whatever you’ve been moving into a custom scenery pack. You’ll find things much easier to deal with.
Posted in File Formats, Scenery by | 4 Comments

WED beta 2

I’ve posted WED beta 2.

The executive summary regarding split beziers: use beta 2 and re-export your layout and you should be more or less fine. There is no need to avoid them anymore.

Also a note on the source code: I will update the source code base of WED about every two weeks during beta, or whenever anyone asks me to post latest, whichever comes first. If no one asks, this will mean the source code is slightly behind the latest binary beta, but I think we can live with that…it takes a while for me to ball up and post the source code. (Again, if you want the current source code now, you are absolutely entitled to it – send me an email and I’ll post ASAP.)

I will make sure the code is updated when WED goes final, of course I expect a new binary beta about every 3 or 4 days until we get it mostly shaken out.

A thread on X-Plane.org referenced whether program should be labeled beta. I am definitely guilty of leaving some of my old programs labeled as beta, when I should have done one more build and marked them as final. I will try to avoid doing this in the future! But WED is definitely beta material right now.

Thanks to everyone who reported bugs in beta 1 – the feedback was very high quality. The new download’s README contains the list of bug fixes.

Posted in Tools by | Comments Off on WED beta 2

Split Beziers Part 3: A Workaround

In my previous post I described a bug where, when we have a split vertex in an apt.dat layout, X-Plane would draw taxiway lights all over the place. Fortunately, there is a workaround.

Remember that a split vertex is represented as two or three colocated vertices with one or two zero-length segments connecting them. The bug is that zero-length segments cause lights and lines to go haywire.

The fix is therefore simple:

  1. Programs that write apt.dat files can simply set the attributes on the zero-length segment to none.
  2. Future versions of X-Plane (with a real bug fix) can join taxiway lines even when there is a zero-length “break” in the attributes.

This picture shows the results – a split vertex with no attributes on the zero-length segment.


The next WED beta will automatically export split vertices this way – there will be no need to patch X-Plane or change your WED layouts.

Posted in Development, File Formats, Scenery, Tools by | Comments Off on Split Beziers Part 3: A Workaround

Split Beziers Part 2: The X-Plane 860 Bug

In my previous blog post I defined a split vertex in an airport layout and described how they can be simulated in an apt.dat pile using multiple points.

Now that WED is in public beta and people can easily make split beziers, many have noticed the “split bezier” bug in X-Plane 860:

This is a vertex that is split…on the left you can see what it should look like – on the right you can see what it does look like. There are two problems going on:

  1. The taxiway lights have gone crazy at the split vertex. (This is what everyone sees.)
  2. The taxiway line is a bit jumbled at the split vertex too.

It should be noted that this bug will can also happen for any vertex (even unsplit) in rare occaisions due to interactions with the mesh. Same symptom, same buggy code, different cause.

The good news is:

  • There is a workaround that will make the lights look correct and the lines acceptable in X-Plane 8.60.
  • The workaround will be implemented inside WED – no need to change anything.
  • When X-Plane is fixed, it will make the lines correct too.

In my next post I’ll describe the fix and what the results look like.

Posted in Development, File Formats, Scenery, Tools by | Comments Off on Split Beziers Part 2: The X-Plane 860 Bug

Split Beziers Part 1: What’s a Split Bezier

(This blog entry explains the background of split beziers – the next parts will explain the bugs that they cause and the workarounds.)

In apt.dat terminology, a split vertex is any vertex of a polygon where the control handles on either side of the vertex are not exact mirror images. (When there is only one control handle it is therefore by definition split!)

You need a split bezier any time you want to:

  1. Have a sharp corner between two curves and control the tangents of the curves or
  2. Have a sharp corner between a truly straight segment and control the curve of the next segment.



Split Beziers and apt.adt

Now here’s the rub: the apt.dat format does not allow for split beziers – each curved point has only one control handle – the other is calculated by x-plane by mirroring…thus no vertex can ever be split.

(This is due to a total lack of brains on my part when working on the apt.dat format, which is quite embarrassing considering how long I spent thinking about it.)

The Hack

There is a way to simulate a split bezier: if you use zero-length segments (that is, multiple points on top of each other), you can create a shape that works as if it is split.

In its simplest, a split bezier can be created by using 3 vertices.

  1. The first vertex uses the control handle of one side.
  2. The second vertex is not curved.
  3. The third vertex uses the control handle of the other side.

Why does this work? Well, a bezier curve between a curved point and a straight point has zero length if the two points are on top of each other. So what we’ve done is inserted two zero-length segments. The result of this mess is that the control handles on either “side” of this cluster of points can be different!

Is the second point really necessary! Yes! The reason is this: if we simply had the first and third point (two bezier points with different control handles), X-Plane would draw a loop from the first to the second. Remember: two colocated points with ONE control handle form a zero-length curve, but two colocated points with TWO control handles form a loop.

(To see this for yourself, just draw some examples in WED or photoshop. 🙂

Line Continuity

There is one more wrinkle we have to add to the puzzle in order to understand how this works, and what the pitfalls are: line continuity.

A bezier path (taxiway edge, linear segments, etc.) is made up of one or more bezier curves. Each curve has zero or more attributes.

When X-Plane draws the actual taxi lines and lights, it looks for continuous adjacent bezier curves with the same attribute and makes sure the linkage between those attributes is correct.

(This linkage is computed separately for each type of property. So if you have taxiway lines on two segments and lights on one, the taxiway lines will still link!)

The picture above shows a correct vs. an incorrect link. When dealing with unsplit beziers and non-curved points, linkage is pretty much automatic, it just works.

But there is a pitfall to our above hack for split vertices: we have three points on top of each other. They must all have the same attributes in order for linkage to work. A “break” in the continuity of the line for one of the zero-length segments still counts as a break in linkage. The picture on the right was produced by creating a split bezier and removing the double-yellow-line attribute from the second of three vertices.

In my next post I’ll explain the bugs that this causes in X-Plane 8.60.

Posted in Development, File Formats, Scenery, Tools by | Comments Off on Split Beziers Part 1: What’s a Split Bezier

So Why Doesn’t X-Plane Look Like This?

Every now and then someone sends us this:

http://www.xtremesystems.org/forums/showthread.php?t=117500

The question is of course, why doesn’t X-Plane look like that yet?

Now there’s a lot of reasons why flight simulators don’t look like first person shooters…you can definitely optimize any game content for a specific viewpoint — X-Plane’s lack of constraints on the camera position (you can put the camera quite literally ANYWHERE on the Earth at any time of day, atmospheric condition, and orientation) means that there are going to be views that don’t look so hot. And the global scope of X-Plane means that we have to focus on quantity to a certain extent over quality. (If we made KSBD look totally awesome and didn’t ship any state but California in global scenery, where would we be.)

I’ve been working lately on pixel shaders and lighting…when you look at those shots, the total integration of a number of great lighting effects is responsible for a lot of the look. But…I think there’s a more fundamental issue that pixel shaders and carefully made content wouldn’t address.

Simply put, X-Plane’s LOD system isn’t scalable enough.

In order to get images that look that good you need to put a huge amount of detail up close near the camera, where the user can see it, but not put that detail in the background. (Imagine if every tree in those scenes was done in the detail of the foreground – the polygon count would be unmanageable.)

But X-Plane’s scenery SDK (the interface by which scenery content is specified to X-Plane, in other words, “the file formats”) lacks really strong LOD capabilities.

  • The terrain mesh is fixed – you can use LOD to eliminate overlay details, but you can’t actually simplify terrain.
  • The cost of LOD in objects is high enough to prohibit really gradual LOD. No morphing is provided.
  • Textures are mipmapped but loading is not variable, so our VRAM budget doesn’t benefit from LOD and locality of textures in X-Plane space.
  • Generated geometry (roads, trees, etc.) don’t have any LOD except “eliminate whole feature”.
  • There is no far view of 3-d clouds.
  • Airport layouts are tessolated at only one complexity.

I could go on and on…the bottom line is, X-Plane’s rendering model is very static.

Why did we do that? Well, it seemed like a good idea at the time. In particular, recalculating LOD is very expensive on the CPU and at the time we had only one core. Recalculating LOD would cost more in lost fps than it would benefit in offloading the GPU. So we went for static meshes that we could blast out to the card “real fast”.

What you might not know about those screenshots is what kind of hardware it’s running on:

http://www.gameklip.com/v/1606/

Yep…four cores, and overclocked by over a ghz. (I can only speculate that shortly after the clip ends the machine caught on fire. 🙂 In a multicore environment we can apply additional CPU resources to dynamically rebuild the environment to increase the “LOD range” (difference between the near and far view).

In fact, we already started to do that! In X-Plane 830 we modified the sim to build 3-d content (roads, forests, etc.) on a second core while flying, instantiating only the close ones. This saved RAM and improved the overall performance of the sim, and it increases our LOD range.

(Even if something isn’t drawn, it has a cost just to exist – by saying that things that are really far away don’t even exist we improve performance.)

As you can see from the above list, there’s still a lot to do on the LOD front. But the scenery system is continually growing – new features for the various primitives and improvements to the engine will let us continue to improve sim efficiency.

Posted in Development, File Formats, Scenery by | Comments Off on So Why Doesn’t X-Plane Look Like This?

That’s one biiiiig polygon

Something I’m seeing now that WED is in beta: airport layouts with the entire taxiway structure made from one really complex polygon.

I’m not really sure if this is a good idea. First the potential problems:

  • I suspect that the creation of the taxiway layouts can get slow when the number of sides in the airport layout is really huge and there are holes. I don’t know this for a fact because we let the OpenGL libraries do the heavy lifting. Because this loading is done on a second CPU, it might not be noticeable to all users.
  • The pavement can have only one texture direction per polygon, so multiple polygons may be necessary.
  • Certainly in WED having a few large complex polygons slows down editing — if all else is equal, the tools work better with smaller polygons.

Now…overlapping pavement is generally bad (that is, there is a performance cost), but more sides are also expensive. More thoughts:

  • The more square feet of overlap, the worse. So a small overlapping intersection is not so bad, but avoid layering a huge polygon on top of another huge polygon, which just strains the video card.
  • Fewer segments are better. Consider two crossing taxiways…8 segments with overlap, but 12 by making a plus.
  • But wait – the above example is misleading…if you need to change the light types so the blue taxiway lights don’t cross the intersection then you’ll need to add 4 more segments, so now it’s 12 and 12 – a wash. (In this case, having one big polygon is probably easier to manage.)

And for performance…

  • Try going to your layout from far away and watch the last step of loading…if it starts to take a long time to “preload” things it means your layout might be a bit complex.
  • Do not expect X-Plane to become faster at loading airport layouts…the limiting factors are proportional to complexity, so if you have a killer polygon now it’ll be pretty expensive later too.

One other note, from a conversation with Tom…WED splits vertices into a fixed number of segments (per zoom level) so splitting a bezier makes it smoother. X-Plane does not! X-Plane splits beziers based on the overall curvature, so adding more nodes without changing the shape has no effect.

So please do not try to use the split command to make X-Plane “smoother”. We’ll provide a rendering setting for this some day. The current value was chosen because anything smaller looks awful and you have to make it a lot bigger (read: a lot slower fps) to get an even marginal visual improvement.

Posted in Development, File Formats, Scenery, Tools by | Comments Off on That’s one biiiiig polygon