X-Plane 10.30 beta 7 (finally) went live this morning.* More bug fixes made it in, and the bug in the airport library that was stopping so many scenery packs from loading is now fixed.
* The master server was busy doing a backup and thus took forever to push out the beta to the download sites – I actually cut the beta Sunday night. I ended up pausing the backup temporarily but not until we’d lost a day.
X-Plane 10.30 beta 6 is out; as with the entire 10.30 beta 6 run, complete release notes are here. The release notes are meant to be a complete reference; what follows is a few of the major things you might notice in beta 6 (if you’ve managed to update).
Beta 6 fixes a major performance problem from the X-Plane 10 betas. Beta 6 also sets the cloud graphic settings to match 10.25, so at this point 10.30 should be as fast or faster than 10.25 in all cases.
We used the X-Plane Airport Gateway to consolidate over 750 airports that users sent to Robin since X-Plane 10.25. These updates include over 300 new airports and hundreds of updates. You’ll get these lego-brick airports automatically with the update.
I’ll post more about the gateway in a future post, but I believe that at this point WED 1.3 and the gateway are ready to go into beta shortly.
Please do not send any more airport updates to Robin; the gateway will go into beta soon, and we’d like to use it to collect all future changes. (You can only imagine how much work it was for Robin to gather up 750 airports by hand! We imported them into the gateway ourselves to test the gateway and get control of the process.)
With beta 6 we now have the new GPS in the C172, the Kingair, and the Baron; all have the full res GPS in the 3-d cockpit, and the Kingair even gives you dual GPSs.
There’s still more bugs to fix. On the top of my list is fixing bugs with the cloud visuals, and with their base height (which sometimes doesn’t match what you set in the weather settings). I am also working on getting a few majorly borked DSFs fixed in the next beta (Sydney, Rio, etc.). I’m hoping for another beta by Tuesday, which will also fix the auto update bug.
I say something about filing bugs using the bug report form in every post, and yet readers try to post bugs on the blog. Since writing “don’t do that” in each post clearly doesn’t work, I’m going to try it using the Swedish Chef translator.
Fur zee lufe-a ooff ell thet is mooppet, pleese-a du nut pust boog repurts tu thees blug. Pleese-a use-a zee boog repurt furm – a furm dedeeceted tu nutheeng boot…boog repurts. Iff yuoo pust a boog repurt tu zee blug, I veell delete-a it. Bork Bork Bork!
So…you have been warned – keep posting bug reports to the blog comments and things will only get sillier.
I just discovered that apparently automatic update is broken in X-Plane 10.30 beta 5.* If you are participating in the X-Plane 1030 beta program, then when you receive an automatic notification of a newer beta, then installing the beta will fail with an error number 2 or 3 (depending on what OS you are on).
Update: many users are not affected by this problem. The reason: older auto-updates leave the installer in the right place, so this bug only hits you if you haven’t done a recent, functional auto-update, e.g. from beta 1 to beta 2. Since my X-System folder was relatively clean (due to my recent C drive face-plant) this bug did hit me.
If you see this bug, here is how you can work around this.
A few notes on beta 6 coming shortly…
* There are two things that are particularly annoying about this kind of bug: first, you can’t just get an auto-update to get the bug fix, because auto-update itself is broken, and second, because we didn’t find out that auto-update was broken until shipping beta 6, the bug is still in beta 6, so it’ll take another update to fix it. However, you will only need to use this ‘fix-it’ procedure once.
It should fix the crash on startup for 32-bit Mac that was in beta 4.
A few notes on beta 4, which went live today:
One last note on METARs: when X-Plane finds a METAR with “unlimited” visibility (e.g. 9999, CAVOK, etc.) it will look at the temperature-dewpoint spread to determine the humidity, and then pick a visibility distance that is lower when humid and higher when dry. So under truly dry conditions you should get a less hazy view, while visibility will continue to be constrained on humid days.
Update: the 32-bit Mac version of beta 4 won’t run due to a build configuration problem. We’re working on it now, but I’m guessing it will be 36 hours before we get beta 5 posted. 🙁
Beta 3 just went live. Release notes are still here – the document grows! When the beta is done I’m going to have it printed and use it as a weapon to squash house flies. Bug reporter is still here. Bug reporter is still not the comments section in this post.*
The short summary is: Philipp crushed a huge pile of GPS bugs, and I crushed none of the cloud-related bugs. So please read the bug fix list carefully before you report. We try to make sure there’s a bug list bullet for every single fix in the beta, so that you don’t have to waste your time (or ours!) re-reporting a bug that isn’t fixed. If you reported (hypothetically 🙂 that cloud performance makes you weep (and not in a good way), there’s no need to re-report, I haven’t gotten to it yet.
If you have not tested your payware add-on with X-Plane 1030, please do so ASAP! We do not have a pile of known issues with third party drawing, so if you see something, say something. (We have a number of possible bugs that aren’t reproducible yet – so your bug report might be what lets us get to the bottom of things efficiently. Only you can prevent forest fires!)
* This post comes with an extra helping of snarkiness…Chris and I made the really poor decision to try to debug part of the X-Plane airport gateway deployment from 11:30 PM to 3:30 AM land night. Since we both have small children who didn’t get the memo and woke up at their normal time, I am, at this point, pretty much unaware of what I am typing.
I’m a little slow at blogging this, but 10.30 beta 2 is out – beta 1 users received an auto-update notice.
Please report bugs here. Starting now I am going to delete comments that are bug reports. I really can’t be any more clear about this: please report bugs in the bug report form and not on the blog post.*
The release notes are here. I broke up the bug fix section by beta so you can see what is new in beta 2.
I have already received reports that the “fix” to the slow local map is not actually a fix at all. Unfortunately my C drive lost sectors (again) so I am behind in investigating both this and general performance complaints. I’ll need to rebuild the machine before I can get to these things.
* Why am I being such a jerk about this? Two reasons:
So bugs posted to forums, blogs, email, these are at best slowing down the beta process and at worst getting lost. (Especially forums – since I don’t read them, they are by definition lost.)
And as a final rant: emailing with “should I file a bug about X” is inefficient for everyone. It takes as long for you to write the email as to file the bug. It takes us time to read the email, answer, then get the bug. Just file the bug!
The first public beta of X-Plane 10.30 is here. To get it, go to update an installation of X-Plane and click the “get betas” check-box of the X-Plane installer or demo installer. (As this is a first beta, you should probably run 10.30 on a copy of your main X-Plane folder; it’s premature to run 10.30 as your main install.)
Release notes here. Bug reporter here. Do not report bugs on the blog comments.
We do not read the various third party X-Plane forums. If you find a bug and you discuss it on the org or avsim or fs.com for 10 pages and do not report the bug in the form, we do not know about it. Please do not assume that someone else will report the bug – you’d be amazed how often everyone thought someone else would make the real report.* Also, while I’m ranting, please do not link to forums that require logins or memberships with bug reports; a forum discussion is not a clean bug report!
The release notes are four pages long, so let me try to summarize what we’ve done. There are really four major areas of this beta:
Here are some numbers: from X-Plane 10.11 to X-Plane 10.25, we had 404 commits in GIT, including betas and patches. From X-Plane 10.25 to X-Plane 10.30 beta 1, we have 1113 commits, and we haven’t even run the public beta. This is a big release in terms of work!
If you are making a third party aircraft, please do test your aircraft with 10.30 and report a bug if we broke something! You can also begin work on supporting the new GPS.
But, for the love of all that is beta, please do not release 10.30 aircraft! We’re in public beta and the way the new features work are likely to change. During 10.20 we had developers release 64-bit plugins mid-beta, and they had to immediately redo their release because the beta changed. The safe time to release a 10.30 aircraft will be when 10.30 goes final – no sooner!
(If you are releasing a new product during beta, release it for X-Plane 10.25, then please report a bug if it doesn’t work with the beta.)
* If you are part of a discussion with ten people on a website and you all see a bug, you can pick one person to be ‘the reporter’ – what drives me nutty is when everyone assumes someone else will report and, with no coordination, no one ever does. There have been a number of times recently that I’ve discussed a bug with a third party author and heard “we’ve known about this on XYZ website for months.” I’m sorry, but there are too many third party web-sites and not enough hours in the day for the dev team to scan every forum post for hidden bug reports.
I was going to write this post yesterday, and I’m glad I didn’t, because my estimated release time was off by a day. But 10.30 is now cut and is being mirrored out to our servers. If things go without hitch, we can hit “go” tomorrow.
In the meantime, you can read about what we did here – after a little bit of cleanup I was able to cut the notes down to ten pages. Aircraft authors, you’ll want to read the docs on the new GPS and other cockpit issues.
(10.30 is probably better documented as an early beta than any previous beta we have done, both in terms of completeness and detail of changes and release notes, and in terms of new docs on new features.)
A few weeks ago AMD posted a beta driver for newer Radeon HD cards that fixed some drawing artifacts with X-Plane. They have now released an official, non-beta WHQL that works with X-Plane. So if you have a newer AMD card on Windows, I suggest updating to the new Catalyst 14-4 driver.